Monthly Archives: November 2016

The basic features of a hoverboard

The hoverboard is also called self-balancing scooter, however, most people know them as the hoverboard. It has caught on faster and it is easy to use. The latest hoverboards use smart balance wheel.

The hoverboard has two wheels and it uses the internal gyroscopes in order to detect the movement of the user in order to go into required directions. What you have to do is leaning in the direction where you are going and the electric motors will be activated and it will take you in that direction.

The wheel of a hoverboard has an electric motor with a speed and tilt sensor. It is capable to detect the revolutions per minute of an individual wheel and it sends it to the gyroscope and the speed control boards. It is located in a main body and it is found near its wheels.

The gyroscope with speed control board is used to receive the rpms with the tilt information in a sensor found inside a wheel and they will be sent in the main logic board.  When the board is calibrated, then its gyroscope is zeroed and it is like telling the gyroscope that it is on a flat space and the hoverboard will be tilted on zero.

A logic board is a brain behind a hoverboard; it is the place where the processor will compute into the real time while it keeps the status of the board and which speed that you travel at. They also record the relative speed with the tilt of an individual wheels since the wheels come with opposing tilts so they have opposing motion and rpms.

The hoverboard has two pressure pads that will sit at two switches at each side. If you are leaning forward, a front switch pad will be pushed down while the little plastic wall will slide within the infrared LED with the infrared sensor.

When a sensor has detected the light, then a logic board can tell the motor that it has to keep still. However the light can be interrupted when a switch had pushed down through the weight.  The board will tell a motor for spinning in a certain direction.

The tilt sensor in the wheels let the gyroscope know how far that you are leaning forward or backward. The gyroscope will relay such information to a logic board. When you lean more forward, the logic board will tell the motor to catch up or to spin according to the center of your gravity.  This may be simple but at the same time it is clever mechanism that will allow the user to control cruising speed at the scooter using the weight.

Some hoverboards have now been banned to be in the flights of the airlines because of the fire hazard concern. However, this does not mean that all the hoverboard will catch the fire. The hoverboard has now become the cool gadget of transportation in a short distance.  It is good to read the reviews and to learn the best hoverboard to buy.…

Continue to read
Author | Wendy B Comments | Comments Off Date | 28/11/2016